|
WZRMMC |
Mast collar for 6.9 |
|
|
WZRMPB |
Mast Top Plug |
Mast Top Plug for 8.2 and 6.9 |
|
WZSBP |
WASZP Waterproof Back Pack |
|
|
WZSFCFH84 |
Foil Cover Front Horizontal(84) |
WASZP Front Horizontal Cover for Current Racing (84) Foil |
|
WZSFCFV |
Foil Cover Front Vertical |
|
|
WZSFCRH |
Foil Cover Rear Horizontal |
|
|
WZSFCRV |
Foil Cover Rear Vertical |
|
|
WZSFSS |
WASZP Foot Strap Set |
|
|
WZSMBL |
Mast Bag |
Mast Bag for 8.2 or 6.9 |
|
WZSS6.9BS |
WASZP Sail 6.9m Batten Set |
Batten Set for 6.9m Sail |
|
WZSS8BS |
WASZP Sail 8.2m Batten Set |
Batten Set for 8.2m Sail |
|
WZTSGS |
Sliding Gudgeon Screw |
Tiller Sliding Gudgeon Screw |
|
WZWFTX |
Front Wing Tube with insert |
Front Wing Tube with inner end glued in |
|
WZWHP |
Wing hinge pin |
Wing hinge pin (6mm dia) |
|
WZWIF |
Front wing tube end insert |
|
|
WZWIR |
Rear wing tube end insert |
|
|
WZWJFX |
Front wing corner joint assembly |
Front wing corner joint with fitted dyneema loop. |
|
WZWJRX |
Rear wing corner joint assembly |
Rear wing corner joint with dyneema loop and RF13101 (Kite Block). |
|
WZWOTC |
WASZP Outer Wing Tube Clamp |
6061 Hard Anodized Clamp for WASZP Outer Wing Bar.
As the WZWOTR (Outer wing tube ring) are a tight fit and can only be fitted to new wing bars, the clamp version (WZWOTC) can be fitted to used Outer Wing Bars which have which slightly splayed. |
|
WZWOTR |
WASZP Outer wing tube ring |
Outer wing tube alloy ring. To only be used on new Outer Wing Bars, please buy WZWOTC (WASZP Outer Wing Tube Clamp) if you have a used Outer Wing Bar. |
|
WZWOTX |
Outer wing tube assembly |
Outer wing tube machined and hard anodized with outer wing bar rings glued on both ends. |
|
WZWPO |
Wing support upper pin (6mm dia) |
|
|
WZWRTX |
Rear Wing Tube with insert |
Rear Wing Tube with inner end glued in |
|
WZWSFDL |
Wing support front down left |
|