|
|
BO6X35SH |
Gantry Upper Bolts |
M6x35mm Socket Head Bolt 316SS Partial Thread |
|
|
BO6X35SH |
M6x35mm Socket Head Bolt |
M6x35mm Socket Head Bolt 316SS Partial Thread |
|
|
BO6x40RHA |
Boom Front End Hook Bolt |
M6x40mm Round Head Bolt Allen 316SS |
|
|
BO6x40RHA |
M6x40mm Round Head Bolt Allen |
M6x40mm Round Head Bolt Allen 316SS |
|
|
BO6x75SH |
Rear Horizontal Bulb & Top Connector Fixing Bolts |
M6x75mm Socket Head Bolt 316 SS - Partial Head |
|
|
BO6x75SH |
M6x75mm Socket Head Bolt |
M6x75mm Socket Head Bolt 316 SS - Partial Head |
|
|
BO8LN |
Wand Axle Lock Nut |
|
|
|
BO8W |
Wand Axle Washer |
|
|
|
BO8W |
M8 Washer 316SS |
|
|
|
BO8WP |
Rudder Pin Washer |
M8 Plastic Washer |
|
|
BO8WP |
M8 Washer Plastic |
M8 Plastic Washer |
|
|
BO8x25SH |
Wing Hinge Mount Bolt |
M8x25mm Socket Head Bolt 316SS |
|
|
BOI3-16x31CSP |
Ronstan Small Wedge Kit Bolt |
3/16" x 1-1/4" Countersunk Bolt Phillips 316SS |
|
|
BOI5-16x12P |
5/16 Plastic Bolt (Oversize Bung) |
If the thread inside your boat has been damaged and the standard bung no longer fits securely, this oversize bung is the perfect solution. Simply tap the next imperial size up and fit this replacement bung to restore a watertight seal. |
|
|
WZFRHBBR |
Rear Horizontal Bulb Bolt Rear |
M5x30mm with turned-down socket head. Used to secure Rear Horizontal Bulb to Horizontal Foil. |
|
|
WZFRHBCCV2K |
Rear Horizontal Foil Bulb Connector Kit V2 |
Top connector that mounts to the top of the Rear Horizontal Bulb. Supplied with three fixing screws of varying outer diameters to accommodate tolerance variation, plus a shim for precise fitment. This kit is required to upgrade from the Push Pin (Version 1 |
|
|
WZFRHBCS1 |
Foil Rear Horizontal Bulb Connector Screw Small |
Screw head outer diameter: 7.8 mm.
The size is stamped on the bottom of the screw thread for easy reference. |
|
|
WZFRHBCS2 |
Foil Rear Horizontal Bulb Connector Screw Standard |
Screw head outer diameter: 8.2 mm.
The size is stamped on the bottom of the screw thread for easy reference. |
|
|
WZFRHBCS3 |
Foil Rear Horizontal Bulb Connector Screw Big |
Screw head outer diameter: 8.5 mm.
The size is stamped on the bottom of the screw thread for easy reference. |
|
|
WZFRHBS20 |
Rear Horizontal Foil Bulb Shim 0.20mm |
0.20 mm shim that fits between the Rear Horizontal Bulb and Rear Vertical Foil. |
|
|
WZFRHBX |
Rear Horizontal Foil Bulb Assembly |
Bulb, plus top connector assembly with three bolts |
|
|
WZFRVTPT |
Rear Vertical Foil Top Plug Pin |
|
|
|
WZHB |
Plastic Bolt (Bung) with Washer |
Plastic Bolt (Bung) Rubber washer BO6WR is included. |
|
|
WZRFP |
WASZP Rig Fitting Pack |
The rig fitting pack includes the Mast to Boom Loop, Ronstan Blocks and rope lashings for all WASZP Sails. |
