|
M24FFHC |
Mach 2.41 Front Foil Horizontal with Cover |
M2.41 Front Foil Horizontal Foil. COMES WITH COVER. |
|
M24FFVC |
Mach2.4 Front Vertical Foil with cover |
3 cm longer than 2.3. Significantly stiffer. Thicker at top, slightly thinner at bottom. New layup for better compaction and torsional stiffness. |
|
M24FRHMC |
Mach2.4 Rear Hydrofoil Medium with Cover |
Solid Carbon |
|
M24FRHSC |
Mach2.4 Rear Hydrofoil Small with Cover |
. |
|
M24FRVC |
Mach2.4 Rear Vertical with Cover |
Required for the 2.4 RH. Stiffer and stronger with rethink on construction at the top. COMES WITH COVER. |
|
M26GB |
Mach2.6 Bellcrank |
Bellcrank with 4 mm axle hole - does not need bushing |
|
M2TEG |
Mach2 Tiller Extn with Grip |
Carbon Battlestick Tapered x 1380mm, ID 18mm, No UniJnt |
|
M2F3FFPR |
Mach2.3 Front Foil Push Rod L |
For the longer 2.3 front vertical, made from high tensile SS specially made for us. Approx 131cm x 2mm (M2 thread) |
|
M2F3RVC |
Mach2.3 Rudder Vertical Foil with Cover |
Mach2.3 Rudder Vertical. Seconds only available. Discount on application. |
|
M2FRHS2C |
Mach2.3 Rear Anhedral Foil - Small with Cover |
Mach2.3 Rear Small Anhedral Hydrofoil. Significantly thinner than the medium. |
|
M2FRH |
M2 Rudder Hydrofoil - Large |
Mach2 Rudder Hydrofoil Large |
|
M2FFHS |
M2 Front Hydrofoil - Small |
Still the best all-round foil. |
|
M2FFHC |
Mach2.0 Front Hydrofoil - Large with Cover |
The original Mach2 front foil - Nathan used it to win the 2014 worlds. Limited availability |
|
M2FFHSCC |
M2.0 Front Hydrofoil Second |
* The original Mach2 front foil - Nathan used it to win the 2014 worlds. Limited availability |
|
M2FFV |
M2.0 Front Vertical Foil Second |
Mach2.0 Front Vertical with fittings (except no Bellcrank) (length 1321mm) |
|
M2FFVC |
Mach2.0 Front Vertical Foil with Cover |
Mach2.0 Front Vertical with fittings (except no Bellcrank) (length 1321mm) |
|
M2FRVC |
Mach2.0 Rudder Vertical with Cover |
(length 1320mm) |
|
M2FFPR |
Mach2 Front Foil Push Rod Std |
For the std front vertical foil, made from high tensile SS specially made for us in the USA. Approx 128cm x 2mm (M2 thread) |
|
M2FFRTC |
Mach2 Control Rod Top Terminat |
Mach2 Front Foil control rod top terminator |
|
M2FFBCC |
Mach2 Bell Crank Connector |
1.9 |
|
M2FFBC |
Mach2 Bell Crank |
|
|
M2FFBCA |
Mach2 Bell Crank Axle |
|
|
M2FFBJB |
Mach2 Ball Joint Ball |
|
|
M2FFBN |
Mach2 FF Barrel Nut |
|