|
IGUS-H1FM-0608-10 |
IGUS Flange Bushing (6mm ID, 8mm OD) |
IGUS Flange Bushing (6mm ID, 8mm OD) for Mach2.4 Bowsprit |
|
M24BSCL |
Mach2.4 Bowsprit Compress Link |
Mach2.4 Bowsprit Compression Link |
|
M24BSF2 |
Mach2.4 Bowsprit Front V2 |
Mach2.4 Bowsprit Front V2, Carbon |
|
M24BSH |
Mach2.4 Bowsprit Holder |
Composite Bowsprit Holder including forestay fitting |
|
M24BSL |
Mach2.4 Bowsprit Lever |
|
|
M24BSLA |
Mach2.4 Bowsprit Lever Axle |
|
|
M24BSPR2 |
Mach2.41 Bowsprit Pull Rod V2 |
Mach2.41 Bowsprit Pull Rod Version 2 |
|
M24BSPRA |
Mach2.4 Bowsprit Pull Rod Axle |
|
|
M24BSPRR2 |
Mach2.4 Bowsprit Pull Rod Rear Connector V2 |
|
|
M24BST |
Mach2.4 Bowsprit Shaft |
Mach2.4 Bowsprit Shaft Tube only |
|
M24BSTN |
Mach2.4 Bowsprit Shaft Nut |
|
|
M24BSWCBX |
Mach2.4 Bowsprit Wand Tube Cap Bottom Assembly |
Includes fitted Hales Single Micro Block |
|
M24BSX |
Mach2.4 Bowsprit Assembly - No Gearing |
Bowsprit assembly including telescopic wand. This item does not include any gearing adjustment components. |
|
M24CBSK |
Mach2.4 Bowsprit Kit with Gearing |
Mach2 Bowsprit Kit inc. carbon parts, telescopic wand, all connectors for the front of the boat and adjustable gearing for the centreboard. Not including ropes or cleats for the adjustable gearing. Requires the 2.3 ride height adjuster. (1xM24BSX,1xM24GX) |
|
M24GBCCX2 |
Mach2.4 Bowsprit bellcrank cap assembly V2 |
Bellcrank cap assembly V2 - Mach2.4 |
|
M24GPDSX2 |
Mach2.4 Bowsprit pull down spacer assembly v2 |
|
|
M26BSTA |
Mach2.6 Bowsprit Shaft and Front |
Mach2.6 Bowsprit Shaft and Front |
|
M2CWACRF |
Mach2.4 Bowsprit Compression Link Rear Connector |
Mach2.4 Bowsprit Compression Link Rear Connector / Adjuster |
|
M2C3LP8 |
Mach2 Control Link Pin 3x8mm |
Special build for Mach2 Wand Adjuster Nut. 3mm diam 8.5 mm shank (comes with 2 cir clips) |
|
M2C3LP6 |
Mach2 Control Link Pin 3x6mm |
Special build for Mach2 Control Cable Sliders. 3mm diam 6.5 mm shank (comes with 2 cir clips) |
|
M24BSWCT2 |
Mach2.4 Wand Tube Cap Top V2 |
Carbon Fitting for the top of the telescopic wand. Houses the wand axle and pull rod front end. |
|
M24BSWRT |
Mach2.4 Wand Shaft |
Mach2.4 Carbon Wand Shaft Tapered 82cm |
|
M24BSWS |
Mach2.4 Wand Shaft with paddle |
Carbon Tapered Wand with paddle |
|
M24BSWT |
Mach2.4 Wand Tube |
Mach 2.4 Carbon Wand Tube |